Main characteristics
STUCCO VENEZIANO is a ready-to-use acrylic based paste-form Venetian plaster. The plaster is designed to create extremely stylish interior coatings with a natural look and a spectacular mirror surface. STUCCO VENEZIANO is available in a rich palette of 90 colours that can satisfy even the most demanding design solutions.
Product properties
STUCCO VENEZIANO is available in 90 colours. The plaster is factory produced and tinted, which ensures consistency of the quality and the colour.
STUCCO VENEZIANO is water-soluble, harmless and do not contain solvents, volatile organic compounds and chemical ingredients hazardous to health and the environment.
The product is designed for interior application. It can be applied on any wall with gypsum plaster, as well as on plasterboard and fibreboard. Priming the base with FONDO PRIMO, tinted in white colour, is recommended.
The plaster is ready-to-use and easy to apply. Unlike similar lime-based products, STUCCO VENEZIANO is distinguished by exceptional workability. It should be applied in three layers without additional dilution. The application should be done with a special inox round-edged trowel, from dry to wet areas, performing short tool movements, until an optimally mirror surface is achieved.
The covering has very good coverage and short drying times. One kilogram of STUCCO VENEZIANO is enough for about 2 m2, applied in three layers, and the drying time of the applied layer is about 6 hours.
Technical data
| Colour | according to catalogue |
| Time for drying | around 6 hours for one layer |
| Coverage | 2 m² with 1 kilogram for three layers |
| Working temperature | from +5° C to +25° C |
| Consumption | around 0.200 – 0.250 kg/m² |
| Priming | FONDO PRIMO |
| Packages | plastic buckets of 1.5 kg, 5 kg and 12 kg |
Documents
